NATIONAL INSTRUMENTS

AT-MIO-16X

Card Type               Analog to digital timing converter
Chipset Controller      Unidentified
I/O Options             Analog input, analog output, digital input,
                        digital output
Maximum DRAM            N/A

[Image]

                                CONNECTIONS

      Purpose           Location           Purpose           Location

  34-pin interface         J1             50-pin I/O            J2
  connector                               connector

                        BASE I/O ADDRESS SELECTION

   Address      U112/A5     U112/A6     U112/A7     U112/A8     U112/A9

  »    220h       On          Off         Off         Off          On

       100h       Off         Off         Off          On         Off

       120h       On          Off         Off          On         Off

       140h       Off         On          Off          On         Off

       160h       On          On          Off          On         Off

       180h       Off         Off         On           On         Off

       360h       On          On          Off          On          On

       380h       Off         Off         On           On          On

       3A0h       On          Off         On           On          On

       3C0h       Off         On          On           On          On

       3E0h       On          On          On           On          On

       Note: A total of 255 base address settings are available. The
       switches are a binary representation of the decimal memory
       addresses. Switch A9 is the Most Significant Bit and switch A5 is
       the Least Significant Bit. The switches have the following decimal
       values: switch A9=512, A8=256, A7=128, A6=64, A5=32. Turn on the
       switches and add the values of the switches that are on to obtain
       the correct memory address. (On=1, Off=0)